-
- Engineering / General Mechanical Engineering
- Computer Science homework help
- $15.99
- Find a topic of interest to you or a current event related to the course and post here for discussion. Summarize into a 250 word paragraph, provide the citation/reference using APA format: https://owl.english.purdue.edu/owl/resource/560/10/, then upload the actual document or link to the document right to share with the class. After you have done this portion of the forum assignment, comment…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Dynamics HW
- $15.99
- Dynamics HW I wanna some one really know about dynmics course in mechanical engineering. I have two HW and I want them to 5 hours from posting this HW. I want them exactly 10:30 PM CDT.
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Engineering Mechanics-Statics.
- $15.99
- Engineering Mechanics-Statics... I have attached some sample questions, please check and confirm me can you do timely exam??
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- ENGR 232 Week 5 Lab
- $15.99
- ENGR232 Week 5 Lab Winter 2015-16 Create a published document with your name and section number and version of the lab assignment. Answer each part in a separate cell – include discussion, plots and code where appropriate. Given the initial value problem: 𒚠′′ + ðŸ”𒚠′ + ðŸ—ð’š = 🎠ð’š(ðŸŽ) = −ðŸ 𒚠′ (ðŸŽ) = 👠a)…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- find start and end shear angle (photo attached)
- $15.99
- solve manufacturing question for mech engineering (photo attached)
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- HNC modules mechanical engineering teeside university open learning
- $15.99
- i need anwers for HNC modules mechanical engineering teeside university open learning
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Formal Report Assignment You are tasked to write a formal report with the following specifications. The formal report must be submitted via upload to the Dropbox in Pilot by the due date. I do NOT take late assignments, and you will not pass the class if you do not turn in your formal report. NO EXCEPTIONS! 1 General Requirements 1.1…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- determine all compatible combinations of links for DOF= 2 up to 9 links
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Tempermature-indicating crayons can be used to identify the temperature of metals within one or two degrees
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question???
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- anyone can help me with mechanical engneering grapghing homework ?
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question??
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- this homework assignment, students need to come up with a list of 12 "bugs". Recall bugs are the pain points that bother people, e.g., the BZ box Shark Tank video we saw during the lecture. Start from youself, what bothers you in your everyday life. Is your pain point likely shared by other people? Interview your friends and family. Read…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question????
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- 1 .Find the absorption depths of light radiation with 800 nm wavelength in Si, Ge, and GaAs. 2.Calculate and compare the generation rate for 800 nm light radiation in Si and germanium. Assume the photon flux for the light radiation with 800 nm wavelength is 1.0x 1010/m2-sec. light 3.Calculate the band gap of Si, Germanium, and GaAs by using the…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Design Brief Your task is to design, build and test a prototype double-pipe (i.e. concentric tube) heat exchanger. The objective of the heat exchanger is to cool water which is initially at a temperature of 60 ï‚°C and flowing at a rate of 1.5 L/min to below 50 ï‚°C. You have access to a water supply at room temperature (approximately…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question???
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question???
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help question???
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- 1 .Find the absorption depths of light radiation with 800 nm wavelength in Si, Ge, and GaAs. 2.Calculate and compare the generation rate for 800 nm light radiation in Si and germanium. Assume the photon flux for the light radiation with 800 nm wavelength is 1.0x 1010/m2-sec. light 3.Calculate the band gap of Si, Germanium, and GaAs by using the…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Find the absorption depths of light radiation with 800 nm wavelength in Si, Ge, and GaAs. Calculate and compare the generation rate for 800 nm light radiation in Si and germanium. Assume the photon flux for the light radiation with 800 nm wavelength is 1.0x 1010/m2-sec. light Calculate the band gap of Si, Germanium, and GaAs by using the absorption…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Select a topic on the discussion board (DISCUSSION section of blackboard) There are four categories of topics; organizations, testing methods, elements and specialty components. Each has something to do with industrial materials or industrial standards. See the Instructions for how to select your topic. ONE STUDENT PER TOPIC. (If one you want is chosen by someone else, pick another one)…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Mechanical Engineering homework help Mechanical Engineering homework help Mechanical Engineering homework help
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Summary: The purpose is to become familiar with the behavior of materials in specific applications. The technical paper will build upon course material; its technical difficulty and content should be comparable to Callister/Rethwisch textbook. Topics for the Technical Paper 1. Gallium nitride semiconductors 2. Silicon Nanowires 3. Manufacturing high quality Graphene 4. Improvements (or replacement materials for) to Li rechargeable…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Assume a constant pressure of 1atm. Each tube will have a diameter of 0.5in and a length of 24in. The tube configuration must fit in an area of 18in by 18in. Assume reasonable uniform surface temperature for the outside of the tubes. Finding will be presented in a report with a memo cover sheet. A narrative including an Introduction, Analysis…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Mechanical Engineering homework help
- $15.99
- Q1: A 120 mm long and 15 mm diameter cylindrical rod is subjected to a tensile load of 46 kN. It must not experience either plastic deformation. Which of the listed materials is suitable for such a requirement and why? Al (E= 70 GPa, YS = 250 MPa, ν = 0.33), Steel (E= 205 GPa, YS = 550MPa, ν =…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Paraphrase
- $15.99
- Paraphrase! Conclusion To sum up, the design project problem wants the student to choose two different material that has different features from each other. In the end of the book, there is a variety of materials that student can choose of. After choosing the two different materials, students can use some of statics method to determine the forces on the…
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- statics: 14 questions on mastering engineering
- $15.99
- statics: 14 questions on mastering engineering
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- three questions mentioned in discription.
- $15.99
- three questions mentioned in discription. 1) 1) A material is required for tire wheels. Documents what you would judge to be the design-limiting properties. Name three candidate materials and reasons. 1) 2) choose an application that is more applicable for additive manufacturing and select a 3D printer. explain your choices. 1) 3) research and describe biometals
- ORDER SOLUTION NOW
-
- Engineering / General Mechanical Engineering
- Write A Paper Analyzing Your Own Presentation On A Topic Of Personal Intere
- $15.99
- Write A Paper Analyzing Your Own Presentation On A Topic Of Personal Interest Include discussion on the following: your choice of topic, purpose, and intended audience your research sources the flow of your outline the appropriateness and effectiveness of your visual aids the effectiveness of your presentation (Did you get your message across? Was the audience moved or swayed by…
- ORDER SOLUTION NOW